PCL Printer Driver
For Microsoft Windows XP/Windows Server2003/Windows Vista/Windows Server2008/Windows 7/Windows Server2008 R2/Windows 8/Windows Server2012
(x86/x64)
Lenovo 许可协议
L505-009-01 04/2007

SOFTWARE LICENSE AGREEMENT
本联想许可协议（以下简称“本协议”）适用于您获得的各种联想软件产品，不论是联想硬件产品上预装或附带的、单独获得的或您从联想网站或经联想准许的第三方网站上下载的。本协议也适用于这些软件产品的任何更新或补丁程序。
如需本联想许可协议的其他语言版本，请访问：www.lenovo.com/license。
只有当您接受本协议时，联想才许可您使用软件产品。点击接受本协议，或者安装、下载或使用软件产品，即表示您接受本协议的条款。
如果您不接受这些条款，请不要安装、下载或者使用软件产品。
• 如果您已获得软件产品并支付了许可费用，请将软件产品退还其提供方，以获得相当于您已支付金额的退款或信用额度。
• 如果您获得了联想硬件产品上预装或附带的软件产品，您可以继续使用硬件产品，但请不要继续使用本协议涵盖的软件产品。
“软件产品”包括计算机软件程序（不论是预装的还是单独提供的）和相关的许可材料，如文档。
“您”可指个人，也可指某个单个法律实体。
1. 权利
您必须妥善保管标有原始日期的销售交易文件，如收据、发票或类似文件，作为您有权使用软件产品的证明。交易文件指明了您获得的使用级别。如果未指明使用级别，则您可在一个硬件产品上安装和使用软件产品的一个副本。您的交易文件也可证明您有资格获得软件产品的未来升级版本（如果有的话）。对于联想硬件产品上免费预装、附带或分发以供在联想硬件产品上使用的软件产品，您的硬件产品销售交易文件可同样作为您有权使用软件产品的证明。
2. 许可
软件产品归联想或联想的某个供应商所有，受版权保护且仅为许可，而不是销售。当您合法获得了软件产品，联想将授予您一个非独占的使用许可。
您可以（1）在您的交易文件指定的最高使用级别范围内使用软件产品；并（2）制作和安装包括备份在内的副本以支持该使用。本协议中的条款适用于您制作的每一个副本。您不得删除或更改任何版权声明或所有权标记。
如果您获得软件产品的升级版本，在安装该升级版本后，您即不得继续使用该软件产品的未升级版本，也不得将其转让给任何其他方。
您应确保使用软件产品的任何人（无论是通过本地访问还是远程访问）都只将软件产品用于您被授权的用途并遵守本协议的条款。
您不得（1）在本协议允许的范围之外使用、复制、修改或分发软件产品；（2）对软件产品进行反汇编、反编译或实施其他解译行为，但按法律明确允许且不能通过合同加以排除的方式实施者不在此限；或（3）分许可、出租或出借软件产品。
如果您违反了本协议的条款，联想可以终止您的许可。如果联想终止了您的许可，您必须销毁软件产品的所有副本。
3. 可转让性
除非按本节允许的方式，您不得将软件产品转让或出让给任何其他方。
预装的软件产品只能在其预装或所依附的联想硬件产品上使用，并且只能与该硬件产品一起转让，它们不能与联想硬件产品分开单独转让。
4. 第三方软件组件和产品
某些联想软件产品以及将来的更新和补丁程序可能包含第三方组件，这些组件可能包括微软视窗预装环境（Windows Preinstallation Environment）。这些第三方组件将按照单独的、不同于本协议的条款和条件向您提供，这些条款和条件通常可以在单独的许可协议或“自述文件（README）”或其他类似标题的文件中找到。该第三方的许可条款和使用限制仅适用于此类组件的使用。
联想提供的第三方软件产品可能受本协议条款的制约，但通常由第三方根据其自己的条款和条件授予许可。非由联想许可的第三方软件产品仅受其随附许可协议条款的制约。
5. 软件产品规格
软件产品规格和指定的操作环境信息可以从软件产品随附的文档（如有，例如“自述文件”或类似标题的文件）或由联想发布的其他文件中找到。
6. 费用
软件产品的费用取决于您所获得的使用级别。
如果您希望提高使用级别，请与联想或软件产品的提供方联系。这可能需要额外付费。
除了根据联想的净收入征收的税费之外，如果任何机构对软件产品征收各种税费，则您同意支付指定的金额或提供免税文件。自购买之日起，您负责承担软件产品的任何财产税。
7. 无保证声明
软件产品按“现状”提供。
除了不可排除的任何法定保证外，联想不提供任何明示或默示的保证或条件，包括但不限于有关软件产品或技术支持（如果有的话）的适销性、适用于某个特定目的，以及不侵权的默示保证或条件。
以上免除同时适用于任何联想的开发者和供应商。
非联想软件产品的供应商或发行商可能会提供他们自己的保证。
除非联想另有书面说明，否则联想不提供技术支持。
8. 责任限制
如联想违约或有其他责任，您有权要求联想赔偿损失。在上述情形下，无论您基于何种理由要求联想赔偿损失（包括重大违约、过失、虚假陈述或其他合同或侵权方面的索赔），除根据可适用法律不能免除或限制的责任外，且仅在根据该法律不能免除或限制的范围内，联想的赔偿责任仅限于您遭受的实际直接损失，且最高不超过您购买软件产品所支付的款项。此限制不适用于联想应依法承担的人身伤害（包括死亡）、不动产和有形动产的损害赔偿责任。
此限制同样适用于联想的供应商和销售商。这是联想及其供应商和销售商所承担责任总和的上限。
在任何情况下，联想及其供应商或销售商对下列情形均不承担责任，即使已被告知该情形有可能发生：（1）第三方向您提出的索赔；（2）您的数据丢失或损坏；或者（3）特殊的、附带的或间接的损害赔偿或任何后果性的经济损害赔偿，包括利润、业务收入、商誉或预期节余的损失。某些国家/地区或司法管辖区不允许对附带的或后果性的损害赔偿进行排除或限制，如果这样，则上述排除或限制可不适用于您。
9. 消费者权利
本协议的任何条款均不影响不能通过合同予以放弃或限制的消费者的任何法定权利。本协议也不改变根据可适用的当地法律您可能拥有的其他权利。
10. 通则
1. 如果本协议的任何条款被判定无效或不可强制执行，本协议的其余条款仍然具有完全的强制执行性和法律效力。
2. 您同意遵守所有可适用的进出口法律和法规。
3. 您或联想均不得在争议事由发生两（2）年后根据本协议提起法律行动，但当地法律另有规定不能通过合同方式弃权或予以限制的除外。
11. 争议解决
如果您在柬埔寨、印度尼西亚、菲律宾、越南或斯里兰卡获得软件产品，则由本软件产品引起或与之相关的争议应通过在新加坡进行的仲裁最终解决，且本协议将受新加坡法律管辖，并根据该法解释和强制执行，而不考虑其法律冲突规则。如果您在印度获得软件产品，则由本软件产品引起的或与之相关的争议应通过在印度班加罗尔进行的仲裁予以最终解决。在新加坡进行的仲裁将依据新加坡国际仲裁中心当时有效的仲裁规则（“SIAC规则”）进行。在印度进行的仲裁将依据印度当时有效的法律进行。该仲裁裁决应为终局的并对双方有约束力（不得上诉），并且裁决应以书面形式作出并阐明事实认定和法律结论。所有仲裁程序，包括在该仲裁程序中出示的所有文件，均采用英语；本协议的英文版在此仲裁程序中优先于任何其他语言的版本。

#### INTRODUCTION

This file describes how to set up your printer driver and contains the most up-to-date information that was available at the time of software release. Please see [2] Limitation/Notes in using PCL5 printer driver section for details of known limitations. For information on printer driver settings and features, please check the Help file.
Please make sure to read this before installing PCL printer driver.

#### CONTENTS

[1] How to install PCL printer driver
(1) Installing PCL printer driver at the first time
(2) Upgrading the PCL printer driver
(3) Uninstalling the PCL printer driver
(4) Notes for the installation
(5) Notes for the upgrading
[2] Limitation/Notes in using PCL5 printer driver

#### [1] How to install PCL printer driver

(1) Installing PCL printer driver at the first time
* Make sure to close all applications before installing.

- 1 | Start Windows and log on as Administrators or Power Users. When using a driver downloaded from the Internet: After downloading the driver from the Internet, extract the file(s) to a folder of your choice. From the [Start] menu, point to [Settings] or [Control Panel], then click [Printers] or [Printers and Faxes] or [View Devices and Printers]. In the Printer folder double click [Add Printer] (it may be in [Printer Tasks]), and click "Next >".
- 2 | Follow the Wizard guidance and select a printer connection method (Local or Network Printer), then click "Next >" to continue.
- 3 | The following procedure below would be an explanation when selecting [Local Printer] in the step above. A) To install the downloaded driver, click [Have Disk] then [Browse] to locate the folder where you had extracted the downloaded driver, from this folder select Disk 1, then click "OK". B) Insert the CD-ROM into the CD ROM Drive, [Have Disk] button in "Manufacturers:" / "Printers:" window, then enter the path (e.g. D:\DRIVERS\PCL{5,6}\XP_VISTA\(language)\DISK1\) of the designated Drive then click "OK". (You can also navigate to the Drive by clicking the [Browse] button).
- 4 | Select the printer port to use. After selecting, click "Next >".
- 5 | Select the printer to use. After selecting, click "Next >".
- 6 | Specify printer name. And if you want to use installed printer as the default printer, check "Yes". After specifying, click "Next >".
- 7 | If you want to share installed printer with other network users, indicate and set sharing. After above, click "Next >".
- 8 | Print test page to confirm that the printer is set up properly. Check on "Yes(recommended)" , then click "Finish", and finally , the installation is completed.

After completing above operation, you can use PCL printer driver for Windows XP/Windows Server2003/Windows Vista/Windows Server2008/Windows 7/Windows Server2008 R2/Windows 8/Windows Server2012.
(2) Upgrading the PCL printer driver
Please follow these installation steps to update the printer driver from old version to new version.
* Make sure to close all applications before upgrading.

- 1 | Open the "Printers" folder (or "Printers and Faxes", "View Devices and Printers") from the "Start" menu or "Control Panel".
- 2 | Open the Properties of the printer to be upgraded.
- 3 | Select "Advanced" tab > "New Driver" button. Click "Next >".
- 4 | Select "Have Disk..." then browse to the folder containing the extracted printer driver INF file. Click "Open".
- 5 | Click "OK" and select the printer model. Click "Next >".
- 6 | Once the installation is complete, click "Finish".
- 7 | Click "OK" to close the printer properties dialog box.

After completing above operation, you can use PCL printer driver of new version for Windows XP/Windows Server2003/Windows Vista/Windows Server2008/Windows 7/Windows Server2008 R2/Windows 8/Windows Server2012.
(3) Uninstalling the PCL printer driver
* Make sure to close all applications before uninstalling.

- 1 | Open [Printers] or [Printers and Faxes] or [View Devices and Printers] folder in [Settings] from [Start] menu.
- 2 | Select the printer you want to uninstall.
- 3 | Press [Delete] key.
- 4 | Select "Driver" Tab in Server Property from File Menu in Printer Folder.
- 5 | Select the driver you want to uninstall.
- 6 | Press [Delete] key.

(4) Notes for the installation

* | With PCL printer driver, the drivers of different versions can't be used together.
* | If "Print Settings" screen doesn't look normal after installation, delete the driver with the procedure of above (3) and reinstall the driver.
* | Do not extract CD-ROM before the installation is finished. Or else, system error might occur.
* | During the driver installation, Windows may suggest to keep the newer module already installed in Windows. Please select "Yes" to use the newer module.
* | The CD-ROM installer causes the Spooler service to temporarily stop. We do not recommend using the CD-ROM installer on a member server of a Microsoft cluster environment because other services that rely on the Spooler might also stop causing a failover to occur. Instead, the Add Printer Wizard should be used. If this is done, the Spooler service will not stop.

(5) Notes for the upgrading

* | The settings of overwritten PCL5 drivers will not be inherited.
* | An upgrade can only be performed between drivers of the same model and type of PCL (PCL5e, PCL5c).

#### [2] Limitation/Notes in using PCL5 printer driver

The settings which are introduced below are depending on the printer or the printer driver you use.

[In General]

* | To avoid problems in general, make sure that there is plenty of free disk space.
* | With some applications (e.g. CorelDRAW, Visio), complicated images may take a long time to print.
* | If the printer driver language differs from that of the Operating System, characters may not be printed properly or the characters on the printer driver may not be displayed properly.

[OS/Windows Related Issues]

* | When the spooler is paused, please do not send the print job.
* | If a Separator Page is selected, some documents may not print as expected.
* | Please do not change the "Driver" setting on the "General" or "Advanced Options" tab.

[With Driver Settings]

* | [Copies] in [Setup] Tab: When "Copies" is selected on the driver's "Setup" tab, the value may not be reflected in the application print dialog box. Be sure to set the number of copies only in the driver, not in the application.
* | [Staple] in [Setup] Tab: Documents may not be stapled at the slant angle, even when you select "Top Left Slant" or "Top Right Slant". In such a case, the document will be stapled parallel to an edge of the paper.
* | [Custom Paper Size] in [Paper] Tab: The measurement unit in the Custom Paper Size dialog is reset to "cm" when the driver dialog is reopened, even if the custom paper size was previously specified in "inch". The paper size specification is retained regardless of the unit.
* | [On first page only] in [Watermark] Tab, and [Booklet/Duplex] in [Setup] Tab: The watermark is not printed on the first page when both "On first page only" and "Booklet" are selected.
* | [Print Quality] Tab: I f the "TrueType Mode" is set to "Download as bit image", the watermark may not print correctly.
* | [Booklet/Duplex] in [Setup] Tab: Printing a large document in booklet, duplex or reverse order printing produce a large temporary file. If you encounter an error when printing a large document in booklet, try again after increasing the free area in system installed drive (e.g. C:).
* | [Edge to Edge Print] in [Print Quality] Tab, and [Non Reduction Booklet] in [Setup] Tab: When both "Edge to Edge Print" and "Non Reduction Booklet" funtions are selected, some documents may not print as expected.
* | [Covers] in [Paper] Tab: Use of a different Paper Source for the cover setting might result in a paper mismatch error. This occurs if the cover is of a different paper size than the rest of the document. This only happens if the cover is not blank and if the source tray for the rest of the document is not "Auto Tray Select". As a workaround, change the print settings so that any one of the above conditions are not met. Note: "cover" = Front Cover, Back Cover or Chaptering Pages
* | [Print Banner Page] in [Valid Access] Tab: The first 15 bytes of the hostname can be printed on the banner page. Banner pages cannot be printed using the source tray that is selected to print "Chapter Page". Please use another source tray to print banner pages.

[Graphics/Images]

* | When graphics images or text printed as graphics images are not printed as they appear on your computer screen, change the "Graphics Mode" on the "Print Quality" tab.
* | Selecting the Spool Type as EMF may cause some applications not to print well in "Vector" mode. If this happens, return the Spool Type setting to RAW.

[Fonts/Texts]

* | With Adobe Type Manager(ATM), some characters may not print correctly. To avoid this problem, print the document with PCL 6 or PostScript driver.
* | With some applications, some characters may not print correctly. To solve this problem, change the "TrueType Mode" and/or the "Use Printer Fonts" on the "Print Quality" tab.
* | Documents that contain fonts not installed on your computer will not print correctly. Make sure your document only contains fonts installed on your computer.
* | The watermark as "As Outline only" may not print if the watermark message contains Chinese characters. To avoid this problem, use the PCL 6 driver.
* | Additional lines may appear when the bold HANYI fonts larger than 36 points are printed.
* | The HANYI fonts can not be printed in 300 dpi. To avoid this problem, print it in 600 dpi.
* | To print watermark text in Chinese, choose a Chinese font.

[Connection/Port related Issues]

* | When printing complicated documents to a printer connected with a parallel interface, the printer time-out may cause the document to print incorrectly. If this happens, set the Spool Setting to "Start printing after last page is spooled" and/or extend the IO timeout at the printer operation panel(max. 300 seconds).
* | When the printer is connected with a SMB port, "Update Now" in the Accessories tab doesn't work. Please manually configure the accessories.
* | Based on the way that Windows XP has implemented the SNMP Management API, it is possible that device Accessories will fail to update after the driver's Properties are opened. If this occurs, please restart the OS or log off and back on again. Doing so should resolve the problem.

[CMYK used for Black and White Documents]

* | Black and White documents might be printed in full color (CMYK). To ensure that the job prints using pure Black (K), please change the color mode to "Black and White".
* | When selecting "Color" from "Color/ Black and White" setting in the "Setup" Tab, black and white document may be printed as a color job, depending on application or data. If you want to print a document in black and white, select "Black and White" in "Color/ Black and White" setting.

[Help issues]

* | Windows Vista does not support the help format used in previous versions of Windows. Please download the legacy help application WinHlp32.exe from Microsoft.
* | When resolution setting of Display is smaller than 800x600dpi, "Information Help" window dialog may be oversized on the display. In this case, to close the window, click "X" botton on the right corner of the window dialog.

[Other issues]

* | Additional Page Count in Duplex Printing An extra page is added to the end of odd-paged duplex jobs. The added page might be incremented in the printer's counter.
* | Point&Print drivers do not inherit Watermark settings Drivers installed on a client using Point&Print do not inherit Watermark settings from the server.

* | Reverse Order is not supported with the Duplex, Front Cover, Back Cover, Chapter Pages, Slip Sheet functions.

[Application issues]

* | Microsoft * Microsoft Office XP * - If you are using Office XP, be sure to apply Service Pack 1 or later to avoid printing problems. * MS-Project * - When using with MS-Project, the stripe pattern interval may not print as it appears on your computer screen. If this happens, change the "Graphics Mode". - To print multiple copies from MS-Project, set the number of copies setting in the application print dialog box to 1, and then specify the number of copies using "Copies" setting on the driver's "Setup" tab. - Some applications are known to combine multiple copies of a document into a single job. This results in: - Output copies are not shifted or rotated. - If the staple, fold or perfect binding function is used, all of the copies will be stapled, folded or binded together. Example of such applications: - Microsoft Office Project - Microsoft Office Visio * PowerPoint * - PowerPoint may print some graphics objects with the same color although they are in different colors on the computer screen. To solve this problem, change the object's color. * WordPad - When you change the printer properties from WordPad, changes will not be reflected in the print job immediately following the change.
* | Corel * CorelDRAW * - You can not enter the number of copies greater than 9 in the printer driver dialog opened from CorelDRAW 8, due to a problem in CorelDRAW 8. To print more than 9 copies, set the number of copies in the CorelDRAW 8's print dialog. - The printer driver dialog opened from CorelDRAW 8 may show unreadable characters, due to a problem in CorelDRAW 8.
* | Adobe * Acrobat * - If printed using Adobe Acrobat/Acrobat Reader, black and white PDF documents compressed by MMR are printed in full color with some image distortion/deterioration. This can be prevented by disabling the application's "Print As Image" function. - Adobe Reader might add an extra page of padding to the end of odd-paged duplex documents. This will be counted as a BW page. When application's copies is 1 and PCL5 driver's copies is 2 or more, the extra page is not added. - The driver's number of copies setting might not work correctly when printing from any of the following applications: - Adobe Reader - Adobe Acrobat - Adobe Illustrator - Adobe InDesign Workaround: Use the application's number of copies setting. * Frame Maker * - With Adobe Frame Maker, please use *.FM document to print when "Duplex/Booklet" or "Staple" function is selected. * Page Maker * - PageMaker may not print graphics if a document contains large amount of graphics. To print such documents, change the "Memory Usage" settings to "Font Priority" on the printer operation panel. - PageMaker shifts the image by about one inch with some paper sizes. To solve this problem, print using a different paper size.

All brand names and product names mentioned in this document are trademarks or registered trademarks of their respective companies.