    ================================================================
    License Agreement for Setup Utility Tools
    ================================================================

    1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
       property rights in the SOFTWARE shall remain in Fuji Xerox and
       its third party suppliers.  You have no rights in the SOFTWARE
       except as expressly granted in accordance with this agreement.

    2. LICENSE:  Under this agreement, you are granted a non-exclusive
       license to use the SOFTWARE for the purpose of using with
       compatible Fuji Xerox products in your country.  You are not permitted to
       (1) assign, sublicense, sell, rent, lease, convey, or transfer the
       SOFTWARE to any third party by any tangible media such as floppy
       disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE on a
       network or by a telephone line available to the public or (3)
       alter, modify, decompile, disassemble, reverse engineer, or create
       derivative works based on the whole or any part of the SOFTWARE.
       If any direction on usage or restriction for the SOFTWARE is
       expressly specified in this web site, you are required to follow
       such direction.

    3. TERM: This agreement is effective upon installing the SOFTWARE
       until you terminate the agreement by destroying the SOFTWARE.
       This agreement will also terminate if you fail to abide by any
       terms of this agreement.  In case of termination, you must
       promptly destroy the SOFTWARE.

    4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN
       'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
       IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
       MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT
       TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND
       MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF
       THE SOFTWARE.  IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL
       PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE
       LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR
       CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO
       USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE.

    5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
       or whole, directly or indirectly, in violation of any
       restrictions, laws or regulations imposed by the government of
       your country or any other relevant countries, and are required to obtain
       necessary approval prior to exporting the SOFTWARE.

    =====================================================================
    Additional Information:Setup Utility Tools Ver. 3.9.0
    =====================================================================

    This document provides information about the tools on the following
    items:
    1. Tools Configuration
    2. Prerequisites
    3. File Configuration
    4. Version Improvements
    5. Cautions/Limitations
    6. Inquiries

    ----------------------
    1. Tools Configuration
    ----------------------
    The Setup Utility Tools consist of the following 5 different tools:

    * Upgrade Tool (Verup.exe)
      Upgrades the driver from an old version to a newer version.

    * Uninstallation Tool (UnInst.exe)
      Deletes the selected print driver from the system.

    * Icon Deletion Tool (DelPrn.exe)
      Deletes the printer icon from the printer folder.

    * Setup Disk Creation Tool (Makedisk.exe)
      Creates a setup disk for copying the driver installation
      configuration in one computer, and installing the same
      configuration into other computers.

    * Setup Tool (UserSetup.exe / Setup.exe)
      Installs the driver with the same configuration stored in the setup
      disk.

    ----------------
    2. Prerequisites
    ----------------
    The tools operate on computers running with the following OS:

        Microsoft(R) Windows(R) 2000
        Microsoft(R) Windows(R) XP
        Microsoft(R) Windows(R) XP x64 Edition
        Microsoft(R) Windows Vista(R)
        Microsoft(R) Windows Vista(R) 64-bit Editions
        Microsoft(R) Windows(R) 7
        Microsoft(R) Windows(R) 7 64-bit Editions
        Microsoft(R) Windows(R) 8
        Microsoft(R) Windows(R) 8 64-bit Editions
        Microsoft(R) Windows(R) 8.1
        Microsoft(R) Windows(R) 8.1 64-bit Editions
        Microsoft(R) Windows(R) 10
        Microsoft(R) Windows(R) 10 64-bit Editions
        Microsoft(R) Windows Server(R) 2003
        Microsoft(R) Windows Server(R) 2003 x64 Editions
        Microsoft(R) Windows Server(R) 2008 (*)
        Microsoft(R) Windows Server(R) 2008 64-bit Editions (*)
        Microsoft(R) Windows Server(R) 2008 R2 (*)
        Microsoft(R) Windows Server(R) 2012 (*)
        Microsoft(R) Windows Server(R) 2012 R2 (*)

    Please visit our web site to check the latest software and supported
    operating systems.

            (*) Not supported when Server Core is installed.

    * When using "Uninstallation Tool" under Windows Vista(R), Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10,
      Windows Server(R) 2008, Windows Server(R) 2008 R2, Windows Server(R) 2012, or Windows Server(R) 2012 R2
      please refer to items under "5. Cautions/Limitations".
      About driver deleting method (When using Windows Vista(R), Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10,
      Windows Server(R) 2008, Windows Server(R) 2008 R2, Windows Server(R) 2012, or Windows Server(R) 2012 R2 ).

    * When using Windows NT(R) Server 4.0 Terminal Server Edition, Windows(R) 2000
      Server Terminal Service, Windows Server(R) 2003, Windows Server(R) 2008, Windows Server(R) 2008 R2, Windows Server(R) 2012 or Windows Server(R) 2012 R2
      Terminal Service, please execute Setup Utility Tools with installation mode.

      Please execute Setup Utility Tools with installation mode according to the
      following step.
      Open "Add or Remove programs" in "Control Panel" and then execute Setup
      Utility Tools.

    * When using Windows Vista(R), Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10,
      Windows Server(R) 2008, Windows Server(R) 2008 R2, Windows Server(R) 2012, or Windows Server(R) 2012 R2
      "User Account Control" window is displayed and differs depending on current user permission.
      Under this condition, please click "Allow" if you are a member of the Administrators
      group. Otherwise, you should input administrator password and then click "OK" button.

      In addition, "Program Compatibility Assistant" window is displayed
      when quitting Setup Utility Tools.
      When "This program is installed correctly." is selected,
      this window will not be displayed next time.

    The driver and readme.txt are stored under the folder of each OS
    given below.
    The Cautions/Limitations on the driver are described in readme.txt.
    See the readme file before installing the driver.

       PCL6 Driver
            \PCL

    ---------------------
    3. File Configuration
    ---------------------
    DATAACCESS.DLL
    DELPRN.EXE
    DOASADMIN.EX_
    FXEZDLL.DLL
    FXEZRES.DLL
    FXEZSUTINI.DLL
    FXEZUI.DLL
    MAKEDISK.EXE
    PATH.INI
    SETUP.EX_
    SUT.INI
    UNINST.EXE
    VERUP.EXE
    HELP
    README

    ------------------------------------------------
    4. Version Improvements
    ------------------------------------------------

    This section describes the modifications made for each upgraded
    version.

    [Modifications from Ver 1.0.0]
    * Resolved the situation where the driver cannot be installed using
      the Setup Tool created on floppy disk.
    * Resolved the situation where ports not supported by the tool are
      listed when selecting the output destination port with the Setup
      Disk Creation Tool.
    * Resolved the situation where text are not displayed correctly in
      the message.
    * Resolved the situation where ports not supported by the tool are
      listed when adding the output destination port with the Setup Disk
      Creation Tool.

    [Modifications from Ver 1.2.8]
    *Improved the problem where the setting file were not created correctly
     when Setup Tool is created in a floppy disk.

    [Improvements from Ver 1.4.2]
    *Improved the problem where the driver cannot be deleted with the Uninstallation
     Tool when only the shared printer is installed.
    *Improved the problem where the driver cannot be deleted with the Uninstallation
     Tool after the printer icon had been deleted.

    [Modifications from Ver 2.0.4]
    *Setup Utility Tools are upgraded to support Windows Vista(R).

    [Modifications from Ver 3.0.5]
    *You will be able to specify [Run setup without displaying its screen] and
     [Allow general users to run setup] by the Setup Disk Creation Tool.
    *You will not be able to specify the floppy disk as the creation destination
     folder by the Setup Disk Creation Tool.

    [Modifications from Ver 3.1.1]
    *Setup Utility Tools are upgraded to support Windows(R) 7.

    [Modifications from Ver 3.1.2]
    *Fixed the bug of the registry being inappropriately deleted when deleting network
    printer by Uninstallation Tool / Icon Deletion Tool.

    [Modifications from Ver 3.2.2]
    *Improved the problem of user details setup not being inherited in Setup Tool.

    [Modifications from Ver 3.3.0]
    *The setup disk can now be run even when the folder where it has been stored
     is assigned to a network drive.
    *Resolved the situation where there is no response when printer icon is being created
     using the Setup Tool.

    ----------------------------
    5. Cautions/Limitations
    ----------------------------

    ** Cautions when running the tools other than from the CD-ROM (such
       as using the tools from the HDD)

    When copying the tools to other mediums such as HDD, copy the folder
    "EzInst" and each driver folder in the CD-ROM in the
    directories given below.

    Note that the tools only operate in the following directories:

    |-- PCL                Stores the PCL6 drivers for each OS
    |      |------Win95
    |      |------Win98_Me
    |      |------Nt40
    |      |------i386
    |      |------amd64
    |
    |--- EzInst            Stores the complete set of Setup Utility Tools

    ** Cautions/Limitations

    * Selecting NDS Queue
      (When using Windows NT(R) 4.0, Windows(R) 2000, Windows(R) XP, Windows Vista(R),
      Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10,
      Windows Server(R) 2003, Windows Server(R) 2008, Windows Server(R) 2008 R2,
      Windows Server(R) 2012 or Windows Server(R) 2012 R2)

      Printing cannot be performed if a port/queue on the NDS tree that
      does not exist in the destination port is selected in the Setup Disk
      Creation Tool.

    * Adding Multiple TCP/IP Direct Print Utility Ports (When using
      Windows(R) 95, Windows(R) 98 or Windows(R) Me)

      When adding multiple Fuji Xerox TCP/IP Direct Print Utility ports,
      do not use the following port names for the subsequent added ports.

      * Port names with characters added to the end of an existing port
        name such as "printer1" or "printer-01", if the existing port
        name is "printer".

      * Port names with one or more characters taken away from an
        existing port name, such as "prin" or "print", if the existing
        port name is "printer".

      * The name is not case sensitive in either case above.

    * When "An error has occurred during version upgrade" is displayed
      during version upgrade

      Delete the print driver with the Uninstallation Tool.  Restart the
      computer and create a new printer with the driver installation
      tool.

    * Restarting the system during installation/version upgrading (When
      using Windows NT(R) 4.0, Windows(R) 2000, Windows(R) XP,
      Windows Vista(R), Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10,
      Windows Server(R) 2003, Windows Server(R) 2008, Windows Server(R) 2008 R2,
      Windows Server(R) 2012 or Windows Server(R) 2012 R2)

      When installing the print driver or upgrading the driver version
      using the Setup Tool or Upgrade Tool, always restart
      the computer following the instructions given in the message
      displayed, before using the print driver.
      Unexpected errors may occur if the computer is not restarted.

    * Reflecting the document size using the Setup Tool (When using
      Windows NT(R) 4.0)

      When a paper unique to the driver is selected, the document size
      will not be reflected correctly.

    * Reflecting the document size using the Setup Tool (When using
      Windows(R) 2000, Windows(R) XP, Windows Vista(R), Windows(R) 7, Windows(R) 8,
      Windows(R) 8.1, Windows(R) 10, Windows Server(R) 2003, Windows Server(R) 2008,
      Windows Server(R) 2008 R2, Windows Server(R) 2012 or Windows Server(R) 2012 R2)

      When a paper unique to the driver is selected, the document size
      may not be reflected correctly.

    * If "Current printer settings may be changed if you install the new
      driver.  Do you want to continue?" appears when installing
      driver with the Setup Tool

      Select the check box "Upgrade driver using setup disk" in the
      Setup Disk Creation Tool, and create a setup disk.

    * If Setup Tool is created from a floppy disk using Setup Disk Creation
      Tool with "Upgrade driver using setup disk" selected

      The verup.exe in the floppy disk cannot be activated. Please activate
      setup.exe. By activating setup.exe, the print driver will also be
      upgraded.

    * About specifying port for network printer (When using Windows Vista(R), Windows(R) 7, Windows(R) 8,
      Windows(R) 8.1, Windows(R) 10, Windows Server(R) 2003, Windows Server(R) 2008,
      Windows Server(R) 2008 R2, Windows Server(R) 2012 or Windows Server(R) 2012 R2)

      Network printer port can't be specified by clicking "Browse" button in
      "Setup Disk Creation Tool".
      Please input the port name directly in "Network path of printer (P)"
      text box of "Add printer" dialog.

    * Loading printing settings for Setup Tool

      When the Setup Tool is executed with [Allow general users to run setup] specified,
      the printing settings saved in the setup disk will be loaded to the printing settings of the administrator account.

      Even when the Setup Tool is executed without [Allow general users to run setup] specified but with the administrators account specified at the [User Account Control] screen,
      the printing settings saved in the setup disk will be loaded to the printing settings of the administrator account.

      To load settings to the printing settings of all users including users who executed the Setup Tool,
      configure [Printing Defaults] of the printer when creating the setup disk.
      You can set [Printing Defaults] from the [Advanced] tab of the printer properties dialog.

    * About driver deleting method  (When using Windows Vista(R), Windows(R) 7, Windows(R) 8,
      Windows(R) 8.1, Windows(R) 10, Windows Server(R) 2003, Windows Server(R) 2008,
      Windows Server(R) 2008 R2, Windows Server(R) 2012 or Windows Server(R) 2012 R2)

      To remove drivers from system under Windows Vista(R), Windows(R) 7, Windows(R) 8,
      Windows(R) 8.1, Windows(R) 10, Windows Server(R) 2003, Windows Server(R) 2008,
      Windows Server(R) 2008 R2, Windows Server(R) 2012 or Windows Server(R) 2012 R2 completely,
      please delete drivers and driver package according to the following steps.
      Please be noticed that the driver package will not be deleted
      even if "Uninstallation Tool" is executed.

      (1) For Windows Vista(R), Windows Server(R) 2008

       * Click "Start" and open "Control Panel", then select "Printer" in
         "Hardware and Sound" panel.
       * Delete printer icon in "Printers and Faxes" folder.
       * Right-click in "Printers and Faxes" folder and select "Run as Administrator".
         Click "Server Properties" then "Printer Server Properties" window is displayed.
       * Select indicated driver in "Driver" tab and click "Remove" button.
       * Select "Remove driver and driver package.", then click "OK" button.
       * Restart the computer.

      (2) For Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10, Windows Server(R) 2008 R2, Windows Server(R) 2012 or Windows Server(R) 2012 R2

       * Click the [Start] button, then open [Devices and Printers].
       * Select the printer icon. Click [Remove Device] on the folder tool bar to delete the printer icon.
       * Select any printer icon. Click [Printer server properties] on the folder tool bar to display [Printer Server Properties].
       * From the [Drivers] tab, select a driver to delete, and then click [Remove].
       * Select [Remove Drivers And Package], and then click [OK].
       * Restart the computer.

         If no printer icon appears, display [Printer Server Properties] using the following procedure.

       * Click the [Start] button. Select [Control Panel] and then [Administrative Tools]. Next, open [Printer Management].
       * Click [Printer Servers]. Right click on ["Computer Name" (local)], select [Properties...] to display [Printer Server Properties].

    * About restarting the system after executing the Setup Tool when [Run setup
      without displaying its screen] is specified

      Even when the screen is not displayed after executing the Setup Tool to carry out
      installation or version up of the print driver, always restart the system before
      using the print driver. Otherwise, unforeseen error may occur.

    * About whether the execution of the Setup Tool is successful when [Run setup
      without displaying its screen] is specified

      If the Setup Tool is executed when [Run setup without displaying its screen] is
      specified, you can determine whether or not the execution is successful by the
      completion code returned: 0 when successful and a non-0 when not.

      Also, please check the reason for the failure by the message displayed when the
      Setup Tool is executed without specifying [Run setup without displaying its screen].

    * Using the User Setup Tool when "Allow General User to Execute"is specified

      If a general user places the User Tool in his own desktop to execute it when the user
      account control is enabled for his OS (Windows Vista  and above), an error may occur.

      When this happens, execute the tool again after allowing "Read & Execute" for the Users
      group by the security settings of the folder where the User Setup Tool is placed.

    * Notes When Creating Setup Disk Using Setup Disk Creation Tool
      Run the Setup Disk Creation Tool in the same OS as the OS where you run the setup disk.
      Example:
      When running setup disk in Windows 7, run the Setup Disk Creation Tool in another PC with Windows 7.

    -------------------
    6. Inquiries
    -------------------

    Please call the number provided in the readme.txt for the relevant
    driver.

    "Microsoft", "Windows", "Windows NT", "Windows Server", "Windows Vista" are
    registered trademarks of Microsoft Corporation, U.S.A. in the
    United States and other countries.