05/24/2012
1. Face AE function for XP/Vista/Win7/Win8

05/30/2012

 Follow Face AE frame spec. as below
a: Line Width: 4 pixel
b: Square distance: 2 times of eye distance
c: In the period of 10 seconds from preview start, show frame if face has been distinguished

2. Reduce the delay time of AE stability from 7.5sec to 5 sec when Face is out of windows
3. Improve AE stability when light is turn on and off switch 

06/27/2012

1. Modify selective suspend procedure and control
2. Add protection precedure for DTM testing
3. support 34 languages in installation
4. Add PID: B35C and VID: 04F2
5. Add PID: 029D and VID: 5986

07/04/2012

1. Add frame for MJPEG format
2. Improve AE unstable issue when face disappear and appear switch 
3. Change Chicony PID VID: 04F2, B35C to 04F2,B37C
4. In the period of 10 seconds from preview start, show frame if the Face been distinguished

8/8/2012
1. Fix the Garbage issue in WIN8 Metro AP preview 
   and AMD platform( Platfrom issue)
2. Modify selective suspend procedure to fix blue screen
   issue under WIN8 DTM testing ( system - sleep and PNP 
  (disable and enable) with IO Before and After (Platfrom issue)
3. Modify driver memory managerment for WIN8 DTM( Platfrom issue)
4. For Face AE, When AE target is low than 0x60 under low light, The Face AE driver will 
   increase the target to make Face detection possibility
5. Add delay in selective suspend procedure to fix DTM " USB internal device idle" issue
   ( Platfrom issue)

8/24/2012
 fix below issues
1. Get BSOD 0xd1 when open YouCam after cold boot
2. Get BSOD 0x133 when close YouCam after cold boot
3. Camera APP( build Win8 9200) get no image issue after resume ( S3)


10/23/2012
1. In the period of 3 seconds from preview start, show frame if the Face been distinguished
2. FaceAE function default value is off
3. Add PID: B3BD and VID: 04F2
4. Camera APP( build Win8 9200) get no image issue after resume ( S3)
5. Sleep and PNP (disable and enable) with IO Before and After (Certification) test failed on BSOD
   Monitor VM331STI commands are in conflict with System KS 
   
*** It's not our driver problem as below****

When testing DTM (Win8 9200), The BT get failure and 
fail cause is BT device missing when Microsoft testing 
program create file (BT). In order to prevent BT device
from getting this failure, we modify "VM331STI" procedure
not to enumerate camera device after resume. 
12/20/2012

1. Add " Auto Anti flicker" function for WinXp/Vista/Win7/Win8

12/25/2012

1. default is flicker auto

1/16/2013

1. Lenovo Camera setting APP get no image issue after resume (S3/S4)

2. It shows " error message" when open Amcap and then open TWAIN AP
   Per Lenovo requirment, The error message change to 
   " Device is locked by another application " 

3/1/2013

1. No need to save " Face AE" value to driver table when user select Face AE on.

2. Fix XP issue "System would hang at rebooting after update the Camera Driver"

3. Fix error message issue ( flash fail ) when using burn tool 











